Glass washing machine is a key equipment in a glass processing factory. After been cut into exact sizes, glass should be washed and dried before transmitted into tempering/bending furnace and other processing machineries.
This is a horizontal washing machine, the washing speed can be adjusted as per required.
The rollers (transimission rollers, 8 brush rollers and 6 foam rollels) are all alkali and acid resistant as well as high temperature resistant, so that are of good wearing ability.
A centrifugal fan is used to generate large wind and minimize wind noise, after been heated, the glass surface temperature can be about 30-50 ºC
Flourish company has developed various types of horizontal and vertical washing machine meeting diversified client requirements.
Speed:0.7-3.5m/min
Min. Glass Size:200mm*200mm
Max. Glass Size:1950mm-2000mm
Thickness:3mm-15mm
Power voltage:11kw
Power frequency: 380V 50HZ
Machine Dimension:4400*2400*1200mm
Weight:1200kg
Fault |
Result |
Troubleshooting |
Washing is not clean |
Sewage |
Water is not enough: water pump stuck/pipe stuck |
Brush roller position is not right: re-positioning |
Brush/water tank dirty: remove dirty |
Sand holes |
Dirty particles on surface of glass |
Brush is too dirty, water pump filter damaged, rinse hair brush, repair or replace the strainer |
Glass broken |
Running deviation or side collision or scratches |
Adjust brush roller height
|
Wind tool position is not correct: adjust wind tool so that its distance to glass surface is about 4mm |
Water spraying |
Water accumulation on glass surface |
Fan filter is blocked. Clean it at least twice a week. |
Wind tool position is not correct: adjust wind tool so that its distance to glass surface is about 4mm |
Height fault |
Incorrect height resulting alarms |
Check whether height parameters are not correct |
Check whether encoder coupling is loosing |
Check whether circuit connector is looing |