Glass Edging Machine Description
After been cut into exact sizes, glass edges will be grinded and polished before further processing like insulation, lamination or tempering. We produce all types of glass edging machine like straight line edging machine, double edger, adjacent edger, round edger, shape edger, four side edger and all complicated edging lines. Client can customize machine functions.
- (xx):7200x1000x2500mm
- Overall dimension (L*W*H): 7200x1000x2500mm
- :800mm
- Working table height: 800mm
- :3000KG
- Weight : 3000KG
- :440V10%,601HZ,(,)
- Power voltage: 440V10%,601HZ (Voltage regulator should be provided if this voltage is not qualified)
- :19.2KW
- Power: 19.2KW
- :05m/min-3m/min
- Feeding speed: 05m/min-3m/min infinite speed variation
- : Processing :3mm Max. Straight Line grinding depth: 3mm :2.5mm Edge max. grinding depth: 2.5mm :45° Edge angle: 45° :3-25mm Glass thickness: 3-25mm
- ,,,,.
Nine wheels used for straight edge grinding and polishing as well as sharp edge grinding and polishing.
.(1)
Three Cup Shape diamond wheels used for straight line grinding and polishing (Pic.1) .(2)
Two Cup Shape diamond wheels used for edge grinding (Picture 2) .(3)
Two special wheels are used for edge polishing (Picture 3) (4)
Two special wheels are used for straight edge polishing (Picture 4)
- :(5) Overall structure (Picture 5)
NFI-STE-30301. 2.34.
The machine is composed of discharging rails, glass support, main machine and inlet rails etc.
2.:Loading/unloading
,,.,,,,,.
The machine can be loaded and unloaded with a forklift. During loading and unloading, it should be transferred stably. A crane can also be used for unloading, but should be used together with a belt which should go under the main machine and tie it firmly. It should be unloaded in a balanced way to prevent overturn.
3.:Horizontal adjustment
12A.(7)12B,34.(8)
The main machine can be adjusted horizontally by adjusting Screw 1and 2 as well as foot A (Pic.7). The frame can be adjusted horizontally by adjusting Screw 1and 2 as well as foot B. Transmission chain rails can be adjusted horizontally by adjusting Screw 3 and 4.(Pic.8)
4.:Connection of cooling system
,¢18,No:1-No:8(9).¢63¢50,;(:0.05mpa),,.
The pipe diameter of ¢18 can be used to connect cooling water, No :1-No:8 (Pic.9). One piece of ¢63 and one piece of ¢50 rubber pipe shall be used to connect to drainage port on water tank. Cooling water can be reused. Normal tap water can also be used (Pressure shall be above 0.05mpa) and drained directly out of rubber pipes but cannot be reused.
Our glass grinding/edging factory view
Glass edging machine technical parameters and components
Glass edging/grinding machine Wheels distributions and functions
Glass edging/grinding machine spare parts
Contact Us:
Mr Paul
Sales Manager
Audited Supplier 
){kind=link}
){kind=link}